6
9. Screen Switching
10. Setting Voltage and Current
It is possible to set voltage and current values for AC and DC separately. AC can be output, overlapping on DC.
The items and measurement unit displayed vary with different operating modes.
In addition, the setting values of ACV (alternating voltage) and ACI (alternating current) are peak values.
Protection
setting screen
Measurement
setting screen
Voltage/current setting screen
Waveform setting screen
DISP switch
PROT switch
PROT switch
PROT switch
WAVE switch
VOLT switch
CV mode
CC mode
AC setting
DC setting
Display: ACV Set
Unit: V
Display: ACI Set
Unit: A
Display: DCV Set
Unit: V
Display: DCI Set
Unit: A
Display example in the CV mode
Display example in the CC mode
