Matsusada AMPS Series, Instruction Manual

Page: 19 / 27

12
4-3 Using the bias
Turning the bias voltage ON/OFF switch to the ON position makes it possible to vary bias
voltage using the BIAS knob. Read the setting voltage from the scale on the knob.
4-4 Output Voltmeter
There is a meter on the front panel for displaying the output voltage. Since it is an average
value display, it displays correctly for DC, but displays the average value for AC waveforms.
4-5 Voltage monitor
When the output voltage has been set to maximum output, 10 volts (+10 volts for positive
output, -10 volts for negative output) is output from the output voltage monitor terminal on
the front paneｌ. Output impedance is 1KΩ
Max Bandwidth is over 50kHz .
Scale
Output voltage
AMPS-
0.4B2000
AMPS-
0.6B2000
AMPS-
2B200
AMPS-
5B80
AMPS-
10B40
AMPS-
20B20
000（ccw）
－400V －600V －2kV －5kV －10kV －20kV
500
0V 0V 0V 0V 0V 0V
1000 （cw）
＋400V ＋600V ＋2kV ＋5kV ＋10kV ＋20kV
4 Instructions for operation
V
M
【Front Panel】
Vm=±10V / Vout=±rated voltage