
44
GB
Hints and Tips
Technical Problems
Technical Problems
Problem
Possible Causes
Remedy
The dishwasher does not start. The door is not properly
closed.
Close the door firmly.
The unit is not connected to
the mains socket.
Connect the mains plug to the mains
socket.
The unit is not switched on.
Press the On/Off button and select a
programme.
Rapid Programme LED blinks.
Unit is taking too long to fill
to required water level, water
tap is shut off, or water intake
is restricted, or water pressure
is too low.
Check tap is fully opened, check
water pressure, and check water hose
is not kinked.
Normal Programme LED blinks. Unit is overfilling with water.
Shut off the water tap, disconnect
from the mains and contact a
qualified service agent.
The drain pump is not working
properly.
The anti-flooding system has
operated.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
• Repairs should only be carried out by a qualified technician in strict accordance with current
local and national safety regulations. Unauthorised or incorrect repairs could cause personal
injury or damage to the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general
problems by yourself.
General Problems
Problem
Possible Causes
Remedy
Detergent residue is left in the
dispenser at the end of the
programme.
The detergent dispenser was
still damp when detergent was
added.
Make sure the dispenser is dry before
adding detergent.
The detergent dispenser lid
cannot be closed properly.
Clogged detergent residue is
blocking the catch.
Clean the catch.
Knocking noise in the wash
cabinet.
A spray arm is knocking
against an item in a basket.
Interrupt the programme, and
rearrange the items which are
obstructing the spray arm. See the
section Loading the Dishwasher.
Smearing appears on
glassware and cutlery.
The rinse aid dosage is set too
high.
Adjust the dial of the rinse aid
dispenser to a lower setting.
MID60B12N_IB_7L_130625_Shaun.indb 44
25/06/2013 5:56 PM