12
An approved suitable cable must be connected from the Consumer Unit (main fuse box)
and be protected by its own 30amp fuse or Micro Circuit Breaker (MCB). The electrician
must provide a fused double-pole switch, which disconnects both the line (live) and
neutral conductors.
The switch should be fitted to the kitchen wall
and must be placed in an easy accessible
position in accordance with IEE
regulations.
One end of the suitable power supply
cable connects to the switch and other end connects to hob's power connection box
which is located at the back of the hob.
Remove
the cover of the power connection box
and install the cable
in accordance with the
connection diagram.
The power supply cable must be positioned away from direct heat
sources. It should not
be subjected to a temperature rise of more than 50
C above
room temperature.
This appliance conforms with the requirements of the following EEC Directives:
n
EEC/73/23 and 93/68, EEC/89/336 relating to radio interference,
n
EEC/89/109 relating to contact with foods.
Power connection box
For this hob the cable type must be H05V V-F 3 x
2.5mm
2
and the connection should be made as in
this diagram.
installation guide
MEH60WH D3.qxd 23/5/06 17:34 Page 12