10
installation guide
Fitting the hob into a work surface
1
The hob can be fitted into any work surface provided it is heat resistant up to at least
90ºC.
2
Create an opening with the dimensions shown in the picture below.
The distance between
3
Apply the self-adhesive seal to each edge of the opening and carefully fit the hob
into the opening.
4
Secure the hob in place by tightening the clamps around its perimeter edge, as the
picture below shows. The clamps can be fitted in one of two ways, to accomodate
the thickness of the worktop. If the worktop is too thick to accomodate the clamps,
cut slots within the thickness of the worktop to reduce its thickness.
MEH60WH D3.qxd 23/5/06 17:34 Page 10
the rear edge of the hob and any adjacent wall depends on wall surface. Please
don’t use easily combustible metarial like curtain, paper at nearby the hob.
560mm
490mm
Min.
130mm
Min.
25mm
Installation of 60cm Electric Hob
with Side Knob Control
510mm
580mm
39mm
Min.
A
Min.
B
Neighboorhood walls
A [mm]
B [mm]
Combustible
60
150
Non-combustible
25
40