7
INSTALLATION
GB
4. The electrical connection conditions must
correspond with the specifications on the rating
plate of the dishwasher. Do not use extension
cables.
5. Position the unit next to a water tap and a drain.
Level the unit if needed.
3. Do not connect the unit to the mains socket
before installation. Ensure you are not installing
the unit right in front of the mains socket. This
is to avoid potential damage to the back of the
unit.
After installing the appliance, ensure that the
mains plug is easily accessible.
6. Ensure the water inlet and drain hoses are not
kinked or squashed. The unit must not stand on
the electrical supply cable.
7. Loosen the rings of the drain hose clamp by
turning the screw in anti-clockwise direction.
Then, insert the drain hose through the rings
of the Drain Hose Clamp to the drain outlet
firmly. Tighten the drain hose clamp by turning
the screw in clockwise direction to secure the
connection between the drain hose and the
drain outlet.
up
down
level
Rings of Drain
Hose Clamp
Clockwise to
tighten
Anti-clockwise
to loosen
Rings of Drain
Hose Clamp