24
USB3: Front panel USB connectors
The mainboard has two USB ports installed on the rear edge I/O port array.
Additionally, some computer cases have USB ports at the front of the case. If
you have this kind of case, use auxiliary USB connector USB3 to connect the
front-mounted ports to the mainboard.
Pin
Signal Name
Function
1
VREG_FP_USBPWR0
Front Panel USB Power
2
VREG_FP_USBPWR0
Front Panel USB Power
3
USB_FP_P0-
USB Port 0 Negative Signal
4
USB_FP_P1-
USB Port 1 Negative Signal
5
US
USB Port 0 Positive Signal
6
US
USB Port 1 Positive Signal
7 GND
Ground
8 GND
Ground
9 KEY
No
pin
10 USB_FP_OC0
Overcurrent
signal
Note:
Please make sure that the USB cable has the same pin assignment as indi-
cated above. A different pin assignment may cause damage or system
hang-up.
SIR1: Serial infrared port
The mainboard supports a Serial Infrared (SIR) data port. Infrared ports allow
the wireless exchange of information between your computer and similarly
equipped devices such as printers, laptops, Personal Digital Assistants
(PDAs), and other computers.
Pin
Signal Name
Function
1
Not assigned
Not assigned
2 KEY
No
pin
3 +5V
IR
Power
4 GND
Ground
5
IRTX
IrDA serial output
6
IRRX
IrDA serial input
SMI1: System Management Interrupt
This connector is for use with SMI hardware interrupt power management.
Pin
Signal Name
Function
1 -EXTSMI
Sleep
button
2 GND
Ground
