12
Front Panel Connector
The front panel connector (PANEL1) provides a standard set of switch and
LED connectors commonly found on ATX or micro-ATX cases. Refer to the
table below for information:
PANEL1
Pin
Signal Name
Function
1
HD_LED_P
Hard disk LED pull up (330 ohm) to +5V
2
FP PWR/SLP
MSG LED pull up (330 ohm) to +5V
3
HD_LED_N
Hard disk active LED
4
GND
Ground
5
RST_SW_N
Reset Switch low reference pull down (100 ohm) to GND
6
PWR_SW_P
Power Switch high reference pull up (10000 ohm) to +5V
7
RST_SW_P
Reset Switch high reference pull up (1000 ohm) to +5V
8
PWR_SW_N
Power Switch high reference pull down (100 ohm) to GND
9
RSVD
