47
Boot Up Floppy Seek (Enabled)
If this item is enabled, it checks the size of the floppy disk
drives at start-up time. You don't need to enable this item un-
less you have a legacy diskette drive with 360K capacity.
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when
your system is started.
Gate A20 Option (Fast)
This item defines how the system handles legacy software
that was written for an earlier generation of processors. Leave
this item at the default value.
ATA 66/100 Cable MSG (Enabled)
Enables or disables the display of the ATA 66/100 Cable MSG.
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to
set the typematic rate and the typematic delay settings for
your keyboard.
•
Typematic Rate (Chars/Sec): Use this item to define
how many characters per second are generated by a
held-down key.
•
Typematic Delay (Msec): Use this item to define how
many milliseconds must elapse before a held-down
key begins generating repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if
the password is required at system start up, or if it is only re-
quired when a user tries to enter the Setup Utility.
APIC Mode (Enabled)
This option enables/disables APIC (Advanced Programmable
Interrupt Controller) functionality. The APIC is an Intel chip
that provides symmetric multiprocessing (SMP) for its Pentium
systems.
Summary of Contents for MS9007C
Page 10: ...4 M Ma ai in nb bo oa ar rd d C Co om mp po on ne en nt ts s...
Page 33: ...27...
