57
VGA Default:
OFF
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the video graphics system.
LPT & COM
Default: LPT/COM
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the serial ports,or the parallel port.
HDD & FDD
Default: ON
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the floppy diskette drives or on the IDE
drive channels.
DMA/Master Default:
OFF
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the DMA (Direct Memory Access)
channels.
WakeUp By PCI/LAN/Modem
Default: Disabled
If you enable this item, it allows activity on an add-in card in one of the PCI slots
to resume the system from a power-saving mode. It will also wakeup the system
whenever there is traffic on an installed fax/modem or network adapter. You
might have to connect the fax/modem to a mainboard Wake On Modem
connector, and the LAN card to a mainboard Wake On LAN connector, for this
feature to work.
Ext. Modem Ring Resume
Default: Disabled
If this item is enabled, it allows the system to resume from a software
powerdown or a power-saving mode whenever there is an incoming call on an
installed fax/modem. You might have to connect the fax/modem to a mainboard
Wake On Modem connector for this feature to work.
RTC Alarm Resume
Default: Disabled
If this item is Enabled, it allows you to set a date and time alarm that will
automatically resume the system from a software power down. When you enable
this feature, new setup items appear to let you set the alarm. Date (of Month)
Alarm lets you select a day from 1 to 31. Time Alarm lets you select a time for
the alarm in hours, minutes, and seconds.
IRQ Activity Monitoring
Press
Enter
to display the IRQ Activity Monitoring sub-menu.
