Matrox Mura MPX-4/0, User Manual

Page: 32 / 98

32 Matrox Display Wall – User Guide
Connecting your Mura IPX Series capture
card
This section describes how to connect your Mura IPX Series 4K Capture and IP Encode/Decode and
your Mura IPX Series 4K Capture and IP Decode card.
Once all your cards are connected, restart your system and install your Matrox software ( see
“Installing your software”, page 50 ).
Supported hardware More information
Input/Output
Mura MPX-4/4, MPX-4/2 See page 36 .
Mura MPX-SDI See page 38 .
Input
MURAIPXI-E2MF, MURAIPXI-E2MHF See page 33 .
MURAIPXI-E4JF, MURAIPXI-E4JHF,
MURAIPXI-D4JF, MURAIPXI-D4JHF
See page 34 .
Mura MPX-V16, MPX-V8 See page 42 .
Output
Mura MPX-4/0 See page 40 .
C900 See page 45 .
C680 See page 46 .
Console
P690 PCIe ×16 See page 71 .
P690 Plus LP PCIe ×16
(dual-monitor cable)
See page 72 .
P690 Plus LP PCIe ×16
(quad-monitor cable)
See page 74 .
M9120 PCIe ×16, M9125 PCIe ×16 See page 75 .
M9120 Plus LP PCIe ×1 / ×16 See page 76 .
M9140 LP PCIe ×16 See page 77 .
M9128 LP PCIe ×16 See page 78 .
M9138 LP PCIe ×16, M9148 LP PCIe ×16 See page 79 .
Note : To make sure your cables are securely attached to your Matrox cards, use a cable retention
bracket. To purchase a cable retention bracket, contact your Matrox representative. For more
information,
see “Appendix C – Matrox secure cable solution”, page 81 .