Matrox Maevex Series – User Guide
23
Validating your Maevex setup
After connecting your Maevex devices, we recommend you validate your connection setup and
network discovery before you continue.
Description of LEDs
Maevex 6100 encoder
The LED on your Maevex 6100 encoder provides information to help you troubleshoot your Maevex
product. The following describes the LED on your Maevex device.
LED color
6100 encoder
Green (solid)
Card is active.
Green (slow blink)
Card is restarting.
Green (fast blink)
Configuration reset in process.
Amber (solid)
Card is in maintenance mode.
Amber (slow blink)
Card is restarting and is in maintenance mode.
Amber (fast blink)
Card is updating the firmware.
Red (solid)
Card has detected a fatal error. Try restarting your system. If
after restarting your system the LED indicator is still red,
contact your vendor for technical support (
Black (off)
No power. Make sure your card is properly installed. Also,
make sure your system isn’t in power saving mode (
by-step installation”, page 12
For more information, contact your vendor (
