Matrox Maevex Series – User Guide
17
For information on installing your Matrox software,
see “Installing Matrox PowerStream Plus
.
Line Out
9 9
Optional
– Connect your analog audio output
device (such as speakers) to this connector.
Line In or
HDMI In with
audio
RS232
9 9
Optional
– To control an RS232 device (such as
a monitor) on one of your 5150 decoders with
an RS232 controller connected to an encoder
or with an RS232 controller sending commands
over the network.
5150 encoder
– You need to connect an
RS232 serial cable from your RS232 device to
this connector.
If your encoder is using the
Relayed serial over
IP
feature in PowerStream Plus, use a
straight through serial cable to connect
your RS232 controller to your encoder.
If your encoder is using the
Direct serial over
IP
feature in PowerStream Plus, use the
opposite of the serial cable required by your
RS232 device. This cable may be a null
modem or a straight through cable.
5150 decoder
– You need to connect an
RS232 serial cable from your decoder to your
RS232 device. For this connection, use the
serial cable required by your RS232 device.
This cable may be a null modem or straight
through cable.
If your RS232 device has a DB25 connector,
use a DE9 (also known as a DB9) to DB25
converter to connect your device to this
connector.
RS232
SD™ Card
9
Currently unsupported.
USB
9 9
Currently unsupported.
VGA
9
Optional
– Connect an analog monitor to this
connector. For local viewing of uncompressed
video from your video source.
Connector
Enc
ode
r
De
co
de
r
Description
Required
encoder
connection
