Matrox Convert DVI, Installation And User Manual, Page: 46 / 70

38
Chapter 4, Configuring Matrox Convert DVI
°
To change the Convert DVI display modes:
1 Open the Matrox Convert DVI Control Panel.
2
Click Display Modes .
3
Select one of the following display mode settings:
¦ Note Some display modes are not supported by Mac OS X Lion (see “If
your Convert DVI desktop loses its display” on page 22 ). Whichever display
mode option you select, Convert DVI will always support 1280×1024p @ 60
Hz. This is to ensure Convert DVI’s compatibility with a DVI monitor that
supports only 60 Hz refresh rates when the Convert DVI display modes are
set to 50 Hz. In such a case, you may not be able to see the Convert DVI
desktop.
$
Default Sets the Convert DVI desktop display modes to Convert DVI’s
default 60 Hz and 75 Hz resolutions (see “Convert DVI default display
modes” on page 39 ). You can also set Convert DVI to default display
modes by clicking Reset DVI Output (see “Resetting your Convert DVI
display modes” on page 40 ).