background image

6

Matrox ATC – User Guide

Connection setup

This section describes how to connect your monitors to your Matrox graphics card. Your connection 
setup depends on the connection type your main monitor supports.

For a main analog monitor

If your main monitor uses 50 ohms analog input though BNC (Bayonet Neil-Concelman) connectors 
(such as Sony DDM, NTT-AT SI-DL4M, Barco ISIS, and similar monitors), you need to use a BNC 
cable.

WARNING:

 Don’t change monitor connections while your computer is turned on. While 

your computer is turned on, it may be using monitor settings that are specific to the current 
monitor connections. 

Some

 devices may be permanently damaged if incorrect settings are 

used.

Note:

 To connect a digital monitor (a 

monitor that uses digital input, usually a 
flat panel monitor) to your Matrox 
product, your monitor must have a DVI 
connector.

Some monitors with DVI connectors 
support both digital and analog input. If 
you’re using one of these monitors with 
your Matrox product, make sure it’s configured to use the correct type of input. For more 
information, see your monitor documentation.

WARNING:

 If an unsupported monitor is used with your Matrox product, this monitor 

may be permanently damaged. If you’re using the BNC cable to connect an analog monitor 
to the main connector (

A

) of your graphics card, this monitor must have RGB connectors 

that support 50 ohms and sync connectors that support 75 ohms. For more information, 
see your monitor documentation.

DVI connector 

(digital)

HD-15 connector 

(analog)

DVI connector 

(analog/digital)

Summary of Contents for ATC PCI







































Reviews: