Matrox 5150 Decoder, User Manual, Page: 27 / 49

Matrox Maevex Series – User Guide 27
For information on installing your Matrox software, see “Installing Matrox PowerStream Plus
software”, page 34 .
Line Out
9 9
Optional – Connect your analog audio output
device (such as speakers) to this connector.
Line In or
HDMI In with
audio
RS232
9 9
Optional – To control an RS232 device (such as
a monitor) on one of your 5150 decoders with
an RS232 controller connected to an encoder
or with an RS232 controller sending commands
over the network.
ƒ
Encoder – Connect one end of your RS232
serial cable to the connector on your encoder.
Connect the other end of the serial cable to
your RS232 control device.
ƒ
If your encoder is set to use the
Relayed serial
over IP
feature in PowerStream Plus, use a
straight through serial cable to connect
your RS232 control device to your encoder.
ƒ
If your encoder is set to use the
Direct serial
over IP
feature in PowerStream Plus, use the
opposite of the serial cable required by your
RS232 device. (For example, if your RS232
device requires a null modem cable, use a
straight through cable instead.)
ƒ
Decoder – Connect one end of your RS232
serial cable to the connector on your decoder.
Connect the other end of the serial cable to
your RS232 control device. For this
connection, use the serial cable (null modem
or straight through) required by your RS232
device.
If your RS232 device has a DB25 connector,
use a DE9 (also known as a DB9) to DB25
converter to connect your device to this
connector.
RS232
SD™ Card
9
Currently unsupported.
USB
9 9
Currently unsupported.
VGA
9
Optional – Connect an analog monitor to this
connector. For local viewing of uncompressed
video from your video source.
Connector Enc
ode
r
De
co
de
r
Description
Required
encoder
connection