background image

4

IMPORTANT SAFETY INSTRUCTIONS

WARNING

: This product contains chemicals known to the State of 

California to cause cancer and birth defects or other reproductive harm.

WARNING

: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW 

THESE PRECAUTIONS TO AVOID INJURY!

1.  Never allow children on strength training equipment. Teenagers must be supervised at all times while using this 

equipment.

2.  All warnings and instructions should be read and proper instruction obtained prior to use.

3.  Use this equipment for its intended purposes only.

4.  NEVER allow resistance straps, ropes or other means be attached to this equipment, as this may result in serious 

injury.

5.  NEVER use this equipment for support during stretching, as this may result in serious injury.

6.  Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.

7.  Keep body, hair, clothing and accessories free and clear of all moving parts.

8.  Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.

9.  Check to see that the selector pin is completely inserted into the weight stack.

10.  NEVER use this machine with the weight stack pinned in an elevated position.

11.  NEVER use dumbells or other means to incrementally increase the weight resistance. Only use the means provided 

directly from the manufacturer.

12.  This equipment should only be used in supervised areas where access and control are regulated by the owner.

Summary of Contents for VS-S70





























Reviews: