VY-D691-05 FRAME ASSEMBLY
5.
Upright support: Using (16) 3/8-16 x 4” bolts, (32) 3/8” washers and (16) 3/8” nuts, attach the
upright support to the top of the uprights.
Do not tighten bolts.
6.
Weight storage top: Using (4) 3/8-16 x 3” bolts, (4) 3/8” washers, (4) 3/8” fender washers, and
(4) 3/8” nuts, attach the top of the weight storage to the upright support.
Do not tighten bolts.
7.
Chin bar: Using (16) 3/8-16 x 4” bolts, (32) 3/8” washers and (16) 3/8-16 nuts, attach the chin
bars between the tops of the uprights.
Do not tighten bolts.
Note: If your rack
is not equipped with spotter stands, proceed to step 8. If your rack is
equipped with spotter stands, proceed to steps 9 thru 11.
8.
Tighten bolts: Starting with the bottom of the uprights and working up to the top of the
machine, tighten all bolts to 30 ft-lbs.
STEP 5
STEP 6
STEP 7
