Matrix U5X-04 BIKE, Service Manual

Page: 51 / 72

48
9.17 PUlley Axle SeT RePlACeMeNT
1) Remove the shrouds as outlined in Section 9.11.
2) Remove the drive belt as outlined in Section 9.14.
3) Loosen the nuts holding the generator to the frame (Figure A), and remove the nuts putting tension on the generator belt (Figure B).
4) Once the tension has been removed, walk the generator belt off of the pulley (Figure C).
figURe A figURe B
figURe C
CHAPTeR 9: PART RePlACeMeNT gUiDe