15
CHaPTer 6: eNGiNeeriNG mode
1) To enter Engineering Mode, press & hold the INCLINE DOWN
and SPEED DOWN keys at the same time for 3-5 seconds until
Manager Mode appears on the display.
2) Press the INCLINE or SPEED keys until Engineering Mode
appears on the display (Figure A) and press ENTER.
3) To scroll between settings in the Engineering Mode, press the
INCLINE or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the
setting.
6) Once the setting is correct, press ENTER to save.
7) Press the EMERGENCY STOP to exit Engineering Mode..
6.1 USiNG eNGiNeeriNG mode
CUSTom SeTTiNG
defaUlT
miNimUm
maximUm
UNiT
deSCriPTioN
Disable Errors
ON
ON
OFF
N/A
Resets error log.
Accomplished by pressing
INCLINE DOWN and
SPEED DOWN for 3-5
seconds.
Elevation Minimum
28
20
239
N/A
Controls the low incline
parameter.
Elevation Maximum 230
20
239
N/A
Controls the high incline
parameter.
Auto Calibration
N/A
N/A
N/A
N/A
This function is to
calibrate the treadmill
incline.
Speed Units
MILE
MILE
KILOMETER
DISTANCE
Measurement unit used
for calorie calculations,
distance, and speed.
Pause Time
30 SECONDS
5 SECONDS
10 MINUTES
SECOND / MINUTE Controls the maximum
time the treadmill can be
paused during a workout.
Machine Type
N/A
N/A
N/A
N/A
Sets the machine ID, not
editable.
Reset Defaults
N/A
N/A
N/A
N/A
Reset the default values
to factory settings.
6.2 eNGiNeeriNG mode oVerVieW
fiGUre a
