background image

MATRIX COMSEC

Head Office

394-GIDC, Makarpura, Vadodara - 390010, India  
Tel.:+91 265 2630555, Fax: +91 265 2636598          
E-mail: [email protected]    

Manufacturing Unit

19-GIDC, Waghodia - 391760,Dist. Vadodara, India  
Tel.:+91 2668 263172/73  

Customer Care

Tel.: +91 265 2630555
E-mail: [email protected], [email protected]

www.MatrixComSec.com

Version 1, October 2014.

Connect the Headset (not supplied by Matrix)

If you want to use a Headset, 

Ÿ

 Plug any standard stereo headset with 3.5mm single connector into the 

   headset jack with the symbol      on the left side panel of the phone.

 

Ÿ

 You may also plug in a stereo headset with RJ9 connector into the headset    

   port on the left side panel of the phone, marked with the symbol     .

Ÿ

 When the IP Phone is connected to the network and supplied with power, the  

   booting process initiates.

Ÿ

 After loading the application, the phone obtains the Network Settings,   

   updates the Firmware (if required), obtains the Configuration and then 
   attempts to register. 

Ÿ

 To configure and register the phone as a SIP Extension, refer to the 

   ETERNITY/NAVAN System Manual

. For operating instructions refer to the

   SPARSH VP330 User Guide. 

Both the documents are available on the CD 

   ROM provided to you with the ETERNITY/NAVAN System.

STARTUP AND OPERATE

Step 3

CONNECT

Step 2

 

Connect the Handset

Ÿ

 Connect the handset of the SPARSH VP330  to the phone body using the    

   spring cord.

4.

5.

Connect the IP Network

You can connect to the network using the Ethernet cable or Wireless USB    
Adapter.

Ÿ

 Connect the LAN Port of the phone to the IP Network — A DSL Modem /

   router or LAN Switch — using the Ethernet cable.

OR

Ÿ

 Connect the Wireless USB Adapter into the USB port of the phone.

 

Note: 

You can purchase the Wireless USB Adapter as an optional peripheral 

   device to support wireless network from Matrix.

Connect a PC to the Phone

Ÿ

 Plug in the Ethernet cable into the PC Port of the phone and the other end into

   the LAN Port of your PC.

Connect the Power Supply

Ÿ

 Plug in the connector of the Adapter provided with the phone into the power 

   jack (DC Jack) with the label at the back of the phone. 

Ÿ

 Plug in the Power adapter into a power outlet.

 

Note: Do not connect the Adapter, if you are powering your PoE enabled 

   phone with a LAN Switch that supports Power over Ethernet (PoE as per IEEE 
   802.3af).

6.

Handset

Headset

Headset

Stand attached at 

35 degree angle

5VDC--2A(Max)

LAN

PC

Adapter

Router / 
DSL Modem

Computer

USB Dongle

Stand attached at 

50 degree angle

Reviews: