Technical Information
Boiler
Wattage
2100 watts
Type
Stainless Steel
Capacity
1.8 Litres
Continuous Fill
Yes
Steam Pressure
4.5 Bar
Steam at source
165
°
C
>
Vacuum
Type
Integral
Motor
850 watts
Noise Level
67 dB(A)
Electrical
Voltage 240V ~ single phase
Low Voltage Controls 5V
Cord length 10m
Nominal input power
2950 watts
Hand-arm Vibration Level
<2.5m/s
Trouble Shooting
Symptom
Possible Cause
Action Required
No Power
Faulty wall socket or not
connected
Check connection to wall socket and socket
switch. Try other wall socket
On/Off switch not illuminated
Press to the On position
Fuse Blown
Replace fuse with approved 13A fuse (UK
machines only)
Unknown
Call for service
No Steam
Steam Control turned down
fully clockwise
Turn the control half way
Steamer not ready
Wait for the “Steam Ready” light on the front
of the machine to illuminate
Clean water tank is low
(Beeping Sound & “Refill
Clean Water” light is
illuminated)
Pour CLEAN COLD WATER into the clean
water tank. The beeping will stop. Await for
the “Steam Ready” light to illuminate.
Unknown
Call for service
No Steam, Just
Water
Steamer not ready
Wait for the “Steam Ready” light to illuminate
Boiler at pressure and not
heating (temperature less than
110 ºC
Hold the steam switch on for approximately
one minute, even if just water is coming out.
This will result in the heater coming back on
Unknown
Call for service
Steam Leaking
from front socket
“O” Rings split
Change and re grease “O” Rings. To avoid
this happening ensure “O” rings are grease
before every use
“O” rings worn
Change and re grease “O” Rings. To avoid
this happening ensure “O” rings are grease
before every use
Capacities
Boiler
1.8 Litres
Cold Water Tank
2.5 Litres (easy fill)
Collection Tank
12 Litres
Detergent Tank
2.5 Litres (easy fill)
Dimensions
Height
65cm
Height with handle & basket 88cm
Depth
50cm
Depth with handle & basket 70cm
Width
45cm
Net Weight
30kg
Package height
72cm
Package depth
81cm
Package width
53cm
Package gross weight
37 kg
8