Matrix S7xe-01, Service Manual, Page: 7 / 79

3
CAUtIoN
The battery stored inside the unit contains materials hazardous to the
environment. Proper disposal of the battery is required by law.
groUNDINg INStrUCtIoNS:
The Matrix Stepper must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. The Stepper is equipped
with a cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances. If the user does not follow these grounding
instructions, the user could void the Matrix limited warranty.
DANGER: Improper connection of the equipment grounding
conductor can result in the risk of electric shock. Check with a
qualified electrician if the user is in doubt as to whether the product
is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet, have a proper outlet installed by an
electrician.
2.1 before gettINg StArteD
The Matrix S7xe-01 Stepper is intended for commercial use. To
ensure your safety and protect the equipment, read all instructions
before operating the stepper.
CHooSINg A SIte
The site should be well lit and well ventilated. Locate the Matrix
S7xe-01 Stepper on a structurally solid and flat surface. The
Stepper should have a clearance of 20" on the back side from the
wall or other equipment. This zone is to allow easy access to the
Stepper and gives the user an easy exit path from the machine.
If the site has a heavy plush carpet, to protect the carpeting and
machinery, you should place a rigid plastic base under the unit.
Please do not place the Matrix S7xe-01 Stepper in an area of high
humidity, such as the vicinity of a steam room, indoor pool, or sauna.
Exposure to intensive water vapor or chlorine could adversely affect
the electronics, as well as other parts of the machine.
eleCtrICAl reQUIreMeNtS
The Matrix S7xe Stepper must be AC powered. These units can be
daisy chained together, up to 4 units per dedicated 15 amp circuit,
using a Matrix daisy chain cord adapter (sold separately).
For your safety and the performance of your Matrix product, the
ground on your circuits must be non-looped. Please refer to NEC
article 210-21 and 210-23. Any alterations to the standard Matrix
power cords will void all warranties.
CHApter 2: IMportANt SAfety INStrUCtIoNS