3
cHaPTer 2: imPorTanT SafeTy inSTrUcTionS
2.2 before GeTTinG STarTeD
locaTinG THe UniT
Place the treadmill on a level and stable surface away from direct sunlight. The intense UV light can cause discoloration on the plastics. Locate
your treadmill in an area with cool temperatures and low humidity. Please leave a clear zone behind the treadmill that is at least the width of the
treadmill and at least 79” (2000 mm) long. This zone must be clear of any obstruction and provide the user a clear exit path from the machine.
For ease of access, there should be an accessible space on both sides of the treadmill of at least 24” (600 mm) to allow a user access to the
treadmill from either side. Do not place the treadmill in any area that will block any vent or air openings. The treadmill should not be located in a
garage, covered patio, near water or outdoors.
0.6
m
(2
ft
)
0.6
m
(2
ft
)
0.6
m
(2
ft
)
2
m
(79”)
0.3
m
(1
ft
)
levelinG THe eqUiPmenT
It is extremely important that the levelers are correctly adjusted for proper operation. An unbalanced treadmill may cause belt misalignment or other
issues. Use of a level is recommended.
Once you have placed the treadmill where you intend to use it, raise or lower one or both of the adjustable levelers located on the bottom-front of
the frame.
ProPer USaGe
T
he treadmill can be used in two modes: sled or walk/sprint. To use the treadmill in sled mode, remove the harness so the user has access to
the upper and lower sled handlebars. To use the treadmill in walk / sprint mode, connect the harness and adjust by using the instructions below.
Emergency dismount can be done by grabbing the front or side handlebars and jumping with both feet on the side rails.
SleD moDe
ProPer USaGe
Walk / SPrinT
ProPer USaGe