Matrix NVR03208XCTS, Quick Start Manual

Page: 58 / 92

Matrix SATATYA PARAM NVR Quick Start
54
Scenario1: If the RS and MS are located in the same network.
• To establish the connection between them, Private Network configuration is required.
• For that, enter Private IP and Port of MS. The port that is to be configured is the
Recording Server Listening Port configured in MS Manager as shown below.
• Now the RS and MS will be connected via PN1.
Scenario2: If the RS and MS are located in two different networks.
• To establish the connection between them, Public Network configuration is required. You
can specify three Public network IPs and Ports. The port that is to be configured is ISP
port that has been mapped with the “Recording Server Listening Port” in MS manager.
Contact the Administrator regarding port forwarding configurations.
• Configure the parameters for Preferred Network 1 (PN1), Preferred Network 2 (PN2)
and Preferred Network 3 (PN3) as per the requirement.
Configure the network with the highest priority in Preferred Network 1.
• If Public Networks, ISP1 and ISP2 are configured in PN1 and PN2 respectively.
• Now as the RS and MS are located in two different networks, the connection between
them will be established via ISP1 (PN1) first.
• If due to some network issue, the connection is lost between RS and MS via ISP1
(PN1), then ISP will fall-back to IP2, allowing the RS to re-establish the connection
via ISP2 (PN2).
• Now when PN1 connectivity is resumed, then the connection will be switched over
from the PN2 to PN1.