13
In order to change the rinse aid level,
follow the steps below before turning
on the machine:
1. Press and hold down the programme
selection button
2. Press the Power button to switch on the
dishwasher
3. Keep the programme selection button
pressed until “rA” shows on the display
and then disappears
4. To adjust the level, press the
programme selection button until the
required level is shown on the display,
as listed in the table on below.
5. To store the selected rinse aid level, press the power button.
• If the dishes are not drying properly or are spotted with food
debris, dirt etc., increase the rinse aid level. If blue stains appear
on your dishes, decrease the rinse aid level.
• Always refill the rinse aid when the rinse aid indicator light on the
control panel is illuminated.
• Many brands of rinse aid (as well as detergents) contain
phosphates which escape sewage treatment and can cause
excessive algae growth in waterways. This in turn can pollute
drinking water and cause marine life ‘dead zones’ which are
Level
Brightener Dose
Indicator
1
Rinse-aid not dispensed
r1 is shown the on display.
2
1 dose is dispensed
r2 is shown the on display.
3
2 doses are dispensed
r3 is shown the on display.
4
3 doses are dispensed
r4 is shown the on display.
5
4 doses are dispensed
r5 is shown the on display.
Fig. 7
Fig. 8