Matrix MR311, Manual For Installation, Use And Maintenance, Page: 9 / 24

9
Using the grill
The grill burner is fitted with a flame failure device. This will shut off the supply of gas to the burner in the event that the
flame is extinguished accidentally.
To light the grill burner, follow the instructions below:
1. Open the oven door fully. The oven door must be open during the ignition process – the grill is equipped
with a safety system which will prevent the grill lighting if the door is closed.
2. Push in and turn the oven control knob clockwise until the indicator points to the Grill * position.
3. Press the knob fully in to activate the ignition. Keep the control knob pushed fully in for a maximum of 15 seconds to
allow the safety device to detect that the burner is lit.
4. Close the oven door slowly.
Please note:
If the burner does not ignite after 15 seconds, turn the control knob back to the off position, leave the oven
door ajar and wait for at least one minute before repeating the process above.
If the burner is extinguished accidentally, turn off the control knob and wait approximately one minute before attempting
to relight the burner.
You should allow the grill to preheat for 5 minutes prior to starting cooking
Do not grill for more than 30 minutes.