Matrix MR311, Manual For Installation, Use And Maintenance, Page: 19 / 24

19
Instructions to fit replacement grill injectors:
1. Disconnect the appliance from the gas and
electrical supplies.
2. Remove the accessories from the oven.
3. Remove two securing screws at the left hand side of the
burner, marked A and move the burner to the right to allow
access to the injector.
4. Remove the injector using a 7mm socket spanner and
replace with the corresponding injector as shown in the
table below.
5. Move the burner back into position and refit the securing
screws A.
6. Set the burner primary air rates (see page 20).
7. Refit the accessories.
When converting from Natural Gas to LPG, it is important that
the LPG identity sticker is placed on or adjacent to the rating
plate on the appliance.
Burner LPG Injector Natural Gas Injector
Semi-Rapid 65 97
Rapid 85 118
Wok 95 140
Grill 82 122
Oven 105 140