8
Auto-heat Function
All zones are equipped with an auto-heat function, which reduces the
warming up time for the zone. Each power level has a limited time
for which the auto-heat function can be used. A table showing these
times is shown at the bottom of this page.
To activate the auto-heat function on a zone
•
Switch the hob on, if not already so, and touch the relevant cooking
zone sensor. Next, touch the minus setting selector (5) to set the
power level to 9. Then, touch the plus setting selector (4) and the
cooking zone indicator should alternate between 9 and the letter
'A'. Finally, press and hold the minus setting selector (5) to set the
desired auto-heat power level.
Please note:
You can use the plus setting selector (4) to adjust the
power level if you go too low but pressing the minus setting selector
a second time will cancel the auto-heat function and you will have to
start again.
To deactivate the auto-heat function
•
Simply touch the desired zone's minus setting selector (6). The
display will return the preset power level.
1
1
Zone Power Level
Maximum
Operating Time
(minutes)
2
3
4
5
6
7
8
9
3
4.8 6.5 8.5 2.5
3.5
4.5
- -
- -