Matrix MFU800 Installation Manual Download Page 2

2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please 
note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse 
of the appliance.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental capacity, or 
who lack experience or knowledge about it, unless they have had supervision or instructions on how to use the appliance by 
someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified 
personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with 
your appliance and to register your appliance for guarantee purposes.

  Appliance Model 

  Serial Number 

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC 
(Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical 
safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to 
EEC/89/109.4

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 
2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority 
differentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving 
from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and 
resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out 
wheeled dustbin. 

Summary of Contents for MFU800

















Reviews: