Matrix E3X-01, Service Manual

Page: 38 / 66

34
8.12 HEart ratE gripS rEplacEMEnt
cHaptEr 8: part rEplacEMEnt gUidE
figUrE a
figUrE b
figUrE c
figUrE d
1) Remove the 3 screws holding the HR grip together (Figure A).
2) Pull the 2 halves of the HR grip apart (Figure B).
3) Disconnect the black wire and remove the lower portion of the HR grip (Figure C).
4) Disconnect the red wire and level button and remove the upper portion of the HR grip (Figure D).
5) Reverse Steps 1-4 to install new HR grips.
6) Test the Elliptical Trainer for function as outlined in Section 8.21.