8
Loading/threading the film - Encapsulating / Double Side Laminating
Load film onto top mandrel in the
same fashion as with single side,
remove bottom mandrel as shown
When encapsulating, set the
anti-curl to ‘0’. Re-fit the mandrels
complete with the loaded film
Change/set the roller option to
BOTH HEAT
Load bottom film around roller bar
as shown
Bring top film down under idler bar
and web the films together as shown
overlapping the top & bottom film by
several inches
Film threading diagram -
Encapsulating
Take a piece of cardboard insert it in
between the rollers (in the nip)
Re-fit the feed tray and safety guard
Remember to set the option on the back of the machine to BOTH HEAT before you begin.
Film Under Top
Stabilizer Bar
Top Stabilizer Bar
Top Roll Film
Top Pull Roller
Bottom Pull Roller
Bottom Heating Roller
Bottom Stabilizer Bar
Bottom Roll Film
Top Heating Roller
