6
Loading/threading the film - Single side laminating
Please follow the step by step guide below to correctly load your film;
Remove the feed tray by retracting
the bolt
Remove the top mandrel
Remove the safety guard
Completely unscrew the mandrel
and cap
Load the film onto the mandrel and
make sure it is loaded with the film
coming off the bottom of the roll with
the adhesive side up. Tighten the screw
back up with a screwdriver provided
Refit the mandrel complete with
the loaded film
Film threading diagram -
Thread film from top mandrel down
under top idler bar and over top
laminating roller surface as shown
(ensure film is loaded with adhesive
side up)
Film Under Top
Stabilizer Bar
Top Stabilizer Bar
Top Roll Film
Top Pull Roller
Bottom Pull Roller
Bottom Heating Roller
Bottom Stabilizer Bar
Bottom Roll Film
Top Heating Roller
