Matrix 240.300.090, Translation Of The Original Instructions, Page: 8 / 78

8
Repairs
Only use accessories and spare parts
recommended by the manufacturer. If the
equipment should fail some day in spite of our
quality controls and your maintenance, only have
it repaired by an authorised electrician.
Environmental Protection
Do not simply dispose of the
equipment, accessories and packaging
in the rubbish bin, but bring it for
environmentally sound recycling.
The small effort involved in this is for
the benefit
of our environment.
operation.
Manual operation:
For manual operation, hold the handle such that
your index finger reaches the multi-position
switch.
Standing operation (B2):
In standing operation, put the heat gun in an
upright position on the rear round base and on
the wire bracket that is folded to the back.
The underlying surface must be clean and
dustfree so that no impure air is drawn into the
heat gun and damages the motor.
Service and Maintenance
- Before performing any work on the equipment,
pull the power plug.
- Use a damp cloth to clean the plastic elements.
Do not use any cleansers, solvents, or pointed
objects.
- Regularly clean any dust that is stuck to the
ventilation openings and moving parts with a soft
brush or a paint brush.
Technical data
Supply voltage: 230 V~
Grid frequency: 50 Hz
Power consumption:
Setting 1 approx. 1000 W
Setting 2 approx. 2000 W
Air volume:
Setting 1 approx. 300 l/min
Setting 2 approx. 500 l/min.
Air temperature:
Setting1 approx. 350 °C
Setting 2 approx. 550 °C
Protection class II