Matrix 2016 3x console, Service Manual

Page: 46 / 63

44
10.2 HUResA3x Mye TV bRAcKeT InsTAllATIon - conTInUeD
7) Plug the TV controller wire into the UCB (Figure G).
8) Use the 6 screws removed in Step 2 & 3 to re-attach the 2 halves of the console Figure (H).
9) Route the coax cable through the hole in back of the console (Figure I). Also make sure that the console cable wires are protruding so that
they are accessible (Figure J).
10) Use the female coax adaptor to connect the TV signal extended wire at the console and TV Bracket (Figure K & L).
fIgURe l fIgURe K
fIgURe J fIgURe I
fIgURe H fIgURe g
cHAPTeR 10: sPecIfIcATIons AnD AsseMbly gUIDe