7
GENERAL SAFETY INSTRUCTIONS
WARNING:Read and understand all instuctions.
Failure to follow all instructions listed below
may result in electric shock fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit
Cluttered benches and dark area invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids,gases,or dust. Power tools
create sparks which may ignite the dust or ruins.
Keep bystanders,children,and visitors away
while operating a power tools. Distractions can
cause you to lose control.
Electrical safety
Don’t expose power tools to rain or wet
conditions. Water entering a power tools will
increase the risk of electric shock.
Do not abuse the cord.Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk
of electric shock.
When operating a power tools outside,use an
outdoor extension cord marked “W A”or “W”.
These cords are rated for outdoor use and
reduce the risk of electric shock.
Personal safety
Stay alert,watch what you are doing and use
common sense when operating a power tool.
Do not use tools while tried or under the
influence of grugs,alcohol,or medication. A
moment of inattention while operating power
amy result in serious personal injury.
Dress properly. Do not wear loose clothing or
jewelry,. Keep our hair,clothing and gloves
away from moving parts. Loose clothes,
jewelry,or long hair can be caught in moving
parts.
Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your
finger on the switch or plugging in tools that
have the switch or plugging in tools that have
the switch on invites accidents.
Remove adjusting keys or switches before
turning the tool on. A switch or a key that is left
attached to the tool or rotaing part may result
in personal injury. Please check the sockets
carefully be using.
Use satefy equipment.
Always wear eye
protection. Dust mark,non-skin safety shoes,
ahrd hat, or hearing protection must be used for
appropriate conditions.
Before starting the equipment
Use clamps or other method to secure and
support the workplace to a stable platform.
Holding the work by hand or against your body
is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for
your application. The correct tools will do the
job better and safer at the rate for which it is
designed.
Please choose the right sockets according
to the size of the bolt and nut. You also must
choose the right sockets suit for the size of the
square drive. If use wrong sockets will result in
inaccurate torque and damaging the bolt and
tool. The specification of bolt,nut and required
torque must accord with the precision class of
the bolt, nut and national standard. When there
is high request of torque, please check and
remedy the torque frequently by the torque test
equipment.
Please refer to the table technical below to
adjust the right torque according to different
GB
Summary of Contents for 120.100.230
Page 2: ...2 A B1 B3 B2 2 2 1 1...
Page 32: ...32 WA W...