Matrix Switch Corporation MSC-CP59X59E Product Manual Download | Manualshive

Page: 35 / 56

background image

MSC-CP59X59E Product Manual

destination/source. This option is stored and recalled on power on. When enabling this feature on a 4x4 video
router for example, it would appear as a 2x2 3D router where destination 1 & 2 are paired and 3 & 4 are paired,
likewise for sources. This setting is stored and recalled on power up.

Command

Description

PairIO

Query current value of I/O pairing configuration.

PairIO 0 | 1

Enable or disable I/O pairing (0: disable, 1: enable)

Example

>PairIO

0

>PairIO 1

>

The first command queries the current state of I/O pairing, the second enables it.

3.10.24 PanelCmd Command

Protocol Version: 3.0

Query and assign panel button/GPIO command macros. This system provides a means to easily implement
custom functionality in response to a panel button press or GPIO auxiliary port contact closure (button or switch
to ground). Panel buttons and GPIO pins are specified by numeric ID.

Panel buttons are numbered beginning with ID number 1. Panel button order depends on the panel, but
generally has the top left button as button 1, followed by number 2 in the lower left corner, number 3 in the top
second column, continuing to alternate between top and bottom rows till the last button (lower right hand
corner).

GPIO auxiliary pins start with ID number 65 for GPIO pin 1.

NOTE:

Panel commands must be enabled with the

PanelCmdEn Command

or by setting the pnl.cmdEn

to activate them.

Command

Description

PanelCmd

Query all assigned panel button/GPIO commands.

PanelCmd Button

Query a single panel button/GPIO command.

PanelCmd Button Command

Assign a panel button/GPIO command. Assigning a blank command to a
button or GPIO pin will clear the command (two consecutive single or double
quotes represents an empty string).

Examples

>PanelCmd

1 P0

2 P1

Page 35 of 56

© 2013-2016 Matrix Switch Corporation

www.matrixswitch

«
...
33
34
35
36
37
...
»

Summary of Contents for MSC-CP59X59E

























































Reviews:

No comments

Related manuals for MSC-CP59X59E

Brand: Jetter Pages: 35

Brand: Fortinet Pages: 20

MegaRAID SATA 300-4XLP

Brand: LSI Pages: 3

Brand: M86 Security Pages: 309

Brand: IDT Pages: 292

CNPS7000A Series

Brand: ZALMAN Pages: 9

Brand: AXIOMTEK Pages: 58

SteelCentral AppResponse 2180

Brand: Riverbed Pages: 82

Brand: Commell Pages: 36

Brand: ICP Pages: 68

Brand: ZALMAN Pages: 18

Brand: Allied Telesis Pages: 80

Brand: Corsair Pages: 12

Brand: Conel Pages: 32

iMarc SLV 9820-2M

Brand: Paradyne Pages: 24

8-Port 10/100Mbps Fast Ethernet Switch

Brand: Amer.com Pages: 14

Brand: Neousys Technology Pages: 39

Brand: Planet Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands