Matrix Orbital PK202-25, Technical Manual

Page: 34 / 60

Description This command will place a bar graph at [row], [column]. A [Dir] value
of zero will cause the bar to go right, and one will cause the bar to go
left. The [length] is the size in pixels of the bar graph, each column of
the is five pixels wide, so to specify a length of two and a half columns
use a length value of fifteen.
Remembered No
6.10 Initialize Narrow Vertical Bar
Syntax
Hexadecimal 0xFE 0x73
Decimal 254 115
ASCII 254 “s”
Description This command will load the narrow vertical bar characters into the voli-
tile memory. If you have stored your own custom vertical bar data, use
the ’Load Custom Characters’ command instead to load your custom bar
data into the volitile memory. This command will allow you to use the
’Place Vertical Bar’ command.
NOTE Narrow bars have a width of two pixels.
Remembered No
6.11 Initialize Wide Vertical Bar
Syntax
Hexadecimal 0xFE 0x76
Decimal 254 118
ASCII 254 “v”
Matrix Orbital PK202-25 30