Technical Manual
Wireless CAN Bridge 500 (CB-500)
Matric Technical Manual 185-0053, V8
Page 6 of 12
Switches S2:1,2
Selects the bit rate of the CAN or DeviceNet network.
Switches S2:3
Selects Standard or Extended CAN framing. DeviceNet*
uses standard framing. Some varieties of CAN may use
extended framing.
Switches S2:4
Enables frequency agile mode. Units will hop to a clear
channel if errors are encountered (retry count exceeded).
Note: Both units must have this enabled for the feature to
work properly.
Switches S2: 5,6
Selects the number of retries. The radio will retransmit an
unsuccessful packet the selected number of times before
discarding the packet. Increasing retries may slow the
communication process, but may help reduce discarded
packets.
Bit Rate (Bits/Sec.)
S2:1
S2:2
125K
*
ON
*
ON
*
250K
OFF
ON
500K
ON
OFF
125K
OFF
OFF
CAN Type
S2:3
11 bit (Standard CAN)
*
ON
*
29 bit (Extended CAN)
OFF
Frequency Agile
S2:4
Enabled
ON
Disabled *
OFF *
Retries S2:5 S2:6
1 ON
ON
16 *
ON *
OFF *
64 OFF
ON
128 OFF
OFF
