29 of 32
12B.2 Loosen the Thumbscrew (Chart 8 item 4A) so that the Chain Lock (Chart 8 item A2) moves up and down freely in
the Jackbar (Chart 8).
12B.3
Install
the Jackbars (Chart 8) on the Chain (Chart 14) with the Jackscrews (Chart 8 item A3) facing forward.
Note:
If installing the universal Jackbar (Chart 9) on the Chain (Chart 14) the Brass Screw (Chart 9 item AA9) should
be on the backside of the chain.
12C
Installing the Chain (Chart 14) in the Main Block Assembly (Chart 10)
12C.1 P
lace
the Main Block (Chart 10) near the Chain (Chart 14) with
the surface that contacts the pipe is facing upward.
12C.2
Push
the arm of the Chain Adjustment Mechanism (Chart 10
item B2) downward to open Chain Adjustment Mechanism.
12C.3
Insert
the Chain (Chart 14) between the round bars and Chain
Adjustment Mechanism (Chart 10 item B2) until about 5 inches
of chain is protruding out of the Main Block (Chart 10).
12C.4
Install
the Spacers on each end of the Chain and insert Spacer
Screw and Lock Nut.
12C.5
Rotate
the Main Block (B)
counterclockwise
, until the 5 inch piece
of the Chain (E) sticking out of the Main Block is on your left.
12D Installation of the Chain Stop (Chart 15)
12D.1 Place Spacer (Chart 15 item E1) onto the Machine Screw or Allen Head Screw (Chart 15 item E2).
12D.2 Insert the Screw (Chart 15 item E2) with spacer (Chart 15 item E1) through the holes in the leafs on the chain end
that is protruding 5 inches out of the Main Block (Chart 10).
12D.3 Install the self-locking hex Nut (Chart 15 item E3) on the Screw (Chart 15 item E2) and tighten
The Clamp is now ready for the Alignment or reforming process.
