INT-0322 rev A
11
3.3.6
If you are using a “Wired” Ethernet
connection, the App will automatically
search for your Gas Watcher Router and
will automatically connect once it is
located – this may take a few minutes.
NOTE: To ensure a successful connection when
performing this setup operation, please be
within 10-15 feet of your Gas Watcher
Router.
3.3.7 Select the type of internet connection you
desire for use with your Gas Watcher Router
3.3.8 If you previously selected a “Wired”
network connection and your network
uses DHCP – you do not need to perform
any further settings, simply touch
“Finish” to complete the set-up process. If
you selected using a ‘Wireless” network
connection or are using a “Wired”
connection without DHCP, then proceed
to the next steps.
