Maintenance
Page 11 of 14
6.2
Adjustment tasks
6.2.1
Pendulum compensation
To ensure a horizontal position of the harrow in lifted position, the pendulum compensation
springs are attached. The springs are preset in the factory and should only be readjusted as
required, i.e. if the harrow is does not hang horizontally in lifted position. First, lift the lawn
harrow. Tension the springs by directly turning the laterally attached screws. Only tension the
springs that are opposite of the side on which the harrow hangs down.
6.2.2
Adjustment of the working depth
To achieve the desired work effect, adjust the working depth with the aid of the two feeler
wheels. The deeper the tines are set, the more aggressive the effect. A working depth of 40
mm is recommended.
Pendulum
compensation springs
Fig. 4: Adjustment of the pendulum compensation.
Pressure piece
Screw
Fig. 5: Feeler wheels
Feeler wheels
Fig. 3: Pendulum axle and caster
