6
Page 20
Attachment variants for the coupling support
You can make four different settings on the coupling support (see Fig.10). Position the bolts
in the corresponding holes to achieve the desired setting.
Standard
Couple the triangle in points A and C
Standard with stronger take-up
Couple the triangle in points B and C
Stroke increased by about 45 mm
Couple the triangle in points B and D
Stroke increased by about 45 mm with in-
creased take-up
Couple the triangle in points A and D
Fig. 11: Coupling triangle
Coupling and uncoupling implements
Comply with the axle loads specified by the tractor manufacturer
1.
Drive the tractor forward in front of the implement.
2.
Lower the front power system hydraulically.
3.
Drive slowly toward the implement until the coupling triangle of the tractor
is under the coupling triangle of the implement.
4.
Slowly lift the front power system hydraulically until the implement is
slightly lifted.
5.
Secure the implement with the appropriate triangle locking mechanism.
The triangle locking mechanism depends on the type of implement.
Carry out all settings on a level, non-inclined surface.
A
C
B
D