6
Page 18
Mounting of the hose guide
Now mount the hose guide as shown in the bottom figure. Use one of the M8x25 hexagon
screws and the matching mudguard washer provided.
Hose holder
1 x DIN 933 M8x25
1 x DIN 522-8.4x40x3
Fig. 8: Position of hose guide
Attachment of the front power system
The actual front power system is only suspended in the recess provided on the mounting
bracket with the cross brace of the front power system and bolted to the mounting bracket
with the two bracket bolts (left/right).
Connect the hydraulic lines of the front power system to the hydraulic connections on the
tractor (raise; lower). Fasten the hydraulic hoses using the hose guide on the mounting
bracket.
Recess on mounting bracket
Cross brace
Angle bolts
Fig. 9: Locking mechanism of the front power system
