7
Page 24
Oil drain plug
(M18x1.5)
Fig. 12: Position of drain plug
Procedure for changing oil
1.
Park the tractor on a level surface and shut off the engine. Remove the ignition key
and secure the tractor.
2.
Place a drip pan under the engine PTO shaft.
3.
Unscrew both the oil fill plug and the oil drain plug and drain the oil. (see Figure 10
and 11).
4.
Replace the oil filter.
5.
Replace the seals on the oil fill and oil drain plugs.
6.
Re-insert the oil drain plug.
7.
Fill with new oil and screw in the oil fill plug.
8.
Check the oil level again after a test run and add oil, if necessary.
Dispose of used oil in accordance with environmental regulations!