7
Page 23
To ensure serviceability and compliance with occupational safety requirements, the following
tasks must be carried out after each use.
•
Cleaning the machine.
•
Check to ensure that all safety notices and safety devices are complete and function-
ing.
•
After 5 to 10 operating hours with a new engine PTO shaft, or after a repair, check to
ensure that all bolts are still tightened to the correct torque. (see Table 2)
Thread size:
Tightening torque:
M6
9.9 Nm
M8
24 Nm
M10
48 Nm
M12
85 Nm
M16
210 Nm
Table 3: Screw tightening torques (property class 8.8)
Maintenance intervals
•
Change the gearbox oil first after 100, then every 500 hours of operation, but at least
once per year.
•
Change the oil filter first after 100, then every 500 hours of operation.
Bleed valve
Oil fill and checking plug
(M18x1.5)
Oil filter
Fig. 11: Position of bleed valve / oil fill plug / oil filter