Matermacc IRRIGAMATIC P450, Manual For Use And Maintenance

Page: 14 / 30

REV 0/00
Pag.11
1 Set the hours.
4
Press key to move forward and display the clock time
Press key and without releasing it, press keys or to set
the required minutes.
Press key without releasing it and then press keys or to
modify the displayed hour.
Press key to move forward and display
the minutes.
2
3 Set the minutes.
PRO
GRAM
PRO
GRAM
PRO
GRAM
PRO
GRAM
8.2.3 DISPLAYING "PLUVIOMETRY OPERATION STATE"
Press key to display the state.
It shows only if the console is enabled to the pluviometry operation.
is displayed.
It is usually disabled and
It can be modified only if the flowmeter is mounted on the irrigator.
N (= NO pluviometry)
8.2.4 DISPLAY OF THE POSITION OF THE END-OF-WORK VALVE
Press key to display the position of the end of work valve.
End of work valve set on outlet.
End of work valve set on inlet.
In this case the irrigation is stopped by overpressure.
A
B
It only indicates in which position the end of work valve is mounted and therefore
what system has been used on the irrigator to end the irrigation. In particular:
In this case the irrigation stops by pressure drop.
8.2.5 AUTOMATIC SHUT-OFF
To save energy, a time limit can be set and once it has elapsed the console goes
off automatically after the end of irrigation.
Press key to display the automatic shut-off function.
Press key without releasing it and then press keys or to set
the required minutes. (For ex. 5 min)
1 Set the time.
2
This time can be programmed up to 99 minutes.
PRO
GRAM
PRO
GRAM
IMPORTANT
If zero minutes are set, THERE IS NOT AUTOMATIC SHUT-OFF and
the console shall be switched off manually by pressing key .
ON
OFF