MATE iSense User Manual Download Page 40

Page: 40 / 68

Rules Manager/Device Explorer

V4.5

Page 5-18

5.3.1.

Tree View

The

Tree View

pane on the left side displays a list of connected devices, and for

each device, a hierarchy of video feeds per device, MSF per video feed, and
detection zones (ROI) set for each MSF.

The Tree View shows all the units connected to the same Cortex server.

To connect to a VDU device that is defined as a standalone device:



In the Device Explorer view double click on the device

The device Tree View with its cameras will open in the Rules Manager view.

5.3.2.

Alarm Geometry Pane

IGURE

22:

LARM

EOMETRY

ANE

The Alarm Geometry pane comprises the following parts:



Live Video

- shows the selected video feed. A Play/Pause button is located

under the video frame. When pressed, the button pauses the video in the Rules
Manager to capture a subject and use its image to facilitate setup.



Alarm Geometry Tabs

– located on top of the video display (displayed

when an alarm is highlighted).



Drawing Toolbar

– located to the right of the video display and displayed

when an alarm is highlighted. The toolbar's content varies according to the
Alarm Geometry Tab that is highlighted.

Summary of Contents for iSense





































































Search results

Summary of Contents for iSense

Reviews:

Related manuals for iSense

Brands by name

Popular brands

MATE iSense, User Manual

Search results

Summary of Contents for iSense

Reviews:

Related manuals for iSense

Brands by name

Popular brands