Page 1
PRODUCT INFORMATION:
Study, understand and follow all instructions provided with
this product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these
instructions in a safe accessible place.
INTENDED USE OF THE TOOL
Caution: To help prevent personal injury
WARNING
WARNING
DO NOT DISCARD – GIVE TO USER
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1
year from the date of purchase.
The manufacturer reserves the right to determine whether
the part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs
or replacements of products covered under this warranty are
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
•
Use of this product can expose you to chemicals including
ethylene glycol, gasoline vapors and engine exhaust, which
are known to the State of California to cause cancer, birth
defects, or reproductive harm. For more information, visit
www.P65Warnings.ca.gov. Always wear ANSI approved safety
equipment, safety glasses and clothing when using this
product. Study, understand, and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using
this
product. (Users and by standers).
• Never use this tool for any application other than for which
it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
1 YEAR LIMITED WARRANTY
1903098-14
SPIN HANDLE TORQUE
LIMITING EXTENSION SET
TKSH6
The TKSH6 Spin Handle Torque Limiting Extensions are design
to limit torque delivered to lug nuts when using an impact
wrench.
These tools are not designed for reaching the final
torque specification. Always follow use with torque wrench.
Do not use this tool outside of the designed intent. Never
modify the tool for any other purpose or use.
When unpacking, check the parts diagram and part number
listing on page 7 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
BEFORE USE
Made in Taiwan
to Matco specifications
Innovative.
Handles spin on roller bearings independently
of extension for holding more naturally and performing
quicker.
Wide application range.
Six-piece set covers just over 95%
of vehicles on the road.
Lightweight.
Unlike most limiting extensions, the TKSH6
are made from durable CRO-MO allowing them to stay
lightweight even with added features.
Because the purpose of these tools is to limit torque, some
extensions can be used for other applications within 5 ft. lbs.
above
their rating.
70: Use on 70 ft. lbs
80: Use on 80 ft. lbs.
90: Use on 90 ft. lbs. & 95 ft. lbs.
100: Use on 100 ft. lbs. & 105 ft. lbs.
120: Use on 120 ft. lbs. & 125 ft. lbs.
140: Use on 140 ft. lbs.
Always calibrate (page 2) before use.
ALWAYS USE A TORQUE WRENCH AFTER USE TO
REACH FINAL TORQUE SPEC.
