![background image](http://html.mh-extra.com/html/matco-tools/rn9/rn9_manual_1739899002.webp)
ll. SAFETY GUIDE:
1. Wear adequate protective gear including ANSI
approved goggles and
THICK WORK GLOVES
(RUBBER COATED)
2. Only use the nut riveting adapter with driving tool
that matches with requirements specified on
Product Technical Data.
3. Switch off the driving tool before installing or
uninstalling the nut riveting adapter.
Dimensions:
Weight:
Hex Shank Size:
Riveting Capability:
Rivet Type:
Stroke Limit:
Working Torque:
Recommended RPM:
Requirements of Driving Tools:
Requirements of electric
or pneumatic Driving Tool:
Common Sizes Chart:
*
Tool is capable but may require very high grip strength
8.5" x 5.5" x 2.4"
2.5 lbs.
6.35mm (1/4")
Rivet Nut
Maximum 0.7"
Refer to section III. Operation Guide
Low speed, driver setting (<240 RPM)
• Adjustable torque setting
• Chuck capacity of 6.35mm (1/4") shank
• Minimum 12V for aluminum, or M5 and 10-24 steel rivet nuts
• Minimum 14.4V for steel rivet nuts in M6, M8, 1/4" and 5/16" or stainless in M5
or 10-24
•
Minimum full-size 18V+ for M10 and 3/8" rivet nuts and all other sizes in stainless
steel
(
WEAR GLOVES)
• Clutch provides a felt and/or audible indication of reaching max setting
• Adjustable torque setting
• Chuck capacity of 6.35mm (1/4") shank
•
With maximum torque > 190 in. lbs. for aluminum and steel rivet nuts in smaller sizes
•
With maximum torque > 400 in. lbs. for stainless steel rivet nuts
Rivet Nut Size
Nut
Material
SAE
10-24
SAE
1/4-20
SAE
5/16-18
SAE
3/8-16
M5
M6
M8
M10
Aluminum
Steel/Copper
Stainless Steel
4. The objects to be riveted
MUST BE SECURED
BEFORE
riveting in order to avoid possible injury.
Unsecured objects may rotate with the driving tool
if not secured.
5. The driving tool MUST be stopped if user releases
the adapters body during riveting.
6. During disassembly for mandrel changing or
Maintenance
, take care as there are pre-loaded
springs within the tool.
Rivet Nut
M5
M6
M8
M10
10-24
1/4-20
5/16-18
3/18-16
Rivet Nut Diameter
6.9mm OD
8.9mm OD
10.9mm OD
12.9mm OD
6.9mm OD
8.9mm OD
10.9mm OD
12.9mm OD
Drill Hole Size
7mm (9/32")
9mm (3/8")
11mm (7/16")
13mm (17/32")
7mm (9/32")
9mm (3/8")
11mm (7/16")
13mm (17/36")
Grip Range
26 – 16ga
26 – 13ga
26 – 11ga
26 – 11ga
26 – 16ga
26 – 13ga
26 – 11ga
26 – 11ga
*
*
I. PRODUCT TECHNICAL DATA:
Page 2
RIVET NUT
ADAPTER KIT
RN9
1802030-14